FR EN
leafleaf
Updated on February 28, 2025

Physical installation

Estimated reading: 7 minutes

Introduction

The installation can be carried out using the LiveCD option or by creating a bootable USB drive, but installation using a bootable USB drive will be much faster.

Download the PBXware ISO image from our download link

1. Copy the downloaded ISO image onto a USB stick using a bootable media creator (such as Rufus)

2. Insert the USB key into your machine

3. Configure your machine's BIOS to boot from the USB device

4. Start your machine, wait for the installer to boot, and follow the PBXware Startup & installation section.

Getting started & installing PBXware

Once the virtual machine is created and started, the installation wizard will help you configure PBXware for a first startup.

1. Boot the physical/virtual machine

2. On the installation wizard home screen, you will be able to see the IP address detected by your machine.

The PBXware IP address can be obtained by:

• Obtaining the DHCP server
• Connecting a monitor to the PBXware unit and obtaining the IP address from the command prompt by entering the ifconfig command
• Installing PBXware Finder on a Windows machine also connected to the same network. PBXware Finder can be downloaded at this link

Select the option Next.

3. Select the disk on which you want to install PBXware and click Next

4. Confirm that you indeed want to use this disk to install PBXware and click Next

5. PBXware will format the partitions of the chosen disk

6. Once the partitions are formatted, PBXware will be installed on the chosen disk

7. Now configure the network card you want to use. It will be detected automatically. Click Next

8. Select one of the four options, which respectively allow you to:

• Configure the chosen network card
• Create a virtual network card in bridge mode 
• Create a virtual network card in bonding mode
• Create a virtual network card in bonding & bridge mode

Select one of the four options & click Next

9. Select the network card you want to configure & click Next

10. The options of the chosen network card will be displayed in the following summary: 

11. Select one of the two options that allow you to use DHCP or to assign an IP address manually & click Next.

12. Click Finish to complete the configuration of your network interface

13. An installation summary is now displayed. It informs you that the system has been installed successfully and that a reboot is required. Click Next.

14. Reboot your system (it will restart automatically after 20 seconds without any action on your part).

15. PBXware has been installed successfully. Now go to the IP address mentioned to access the PBXware online configuration wizard.

The setup wizard will ask you to change the password at one of the wizard steps. Once changed, it is very important to remember this password, as it is the system's root password and the setup wizard's password.

Installation wizard

Once the OS installation is complete, go to a web browser at the IP address of your PBXware instance to start the deployment.

The installation wizard is designed to collect the essential data needed to make the system operational. Once the installation wizard is complete, the system should be fully licensed, fully operational, and ready to use.

If you have decided to install PBXware on a platform other than SERVERware, the default password to access the installation wizard is pbxware.

EULA

The EULA (End User License Agreement) is the first step of the installation wizard. Please read the EULA and type "I agree" to continue.

Administrator details

Provide the details of the user who will administer the system. These values are used when logging in to PBXware.
  • Email/Confirm the Email

The provided email address is used as the username to log in.

  • Password/Confirm password

The provided password is used to log in

Server details

  • Root password

PBXware requests this password when connecting to the system/SSH and when accessing system services through the web interface.

  • Confirm the password

Retype the root password entered in the field above.

  • Time zone

Select the time zone in which PBXware is located.

License

The license part allows you to enter a valid (non-active) license. If the system has more than one network card, all found MAC addresses will be displayed.

  • License type

Select a license type for the system. The system comes with two license types: Free License and Requested (paid).

  • License number

Enter the PBXware license number, select the MAC address if there are several, and click 'Next' to save.

  • The MAC address associated with PBXware.

NOTE: The machine must have access to an Internet connection in order to retrieve the license. If more than one MAC address is present, select the one you want to associate with PBXware and click 'Next'.

Locality

Locality allows you to enter the system's "local" values in order to define all the values needed for the system's normal operation.

  • Country

Select the country in which PBXware is located.

  • Prefix

The dialing code where PBXware is located; for example, if PBXware is located in France, you will need to set '33'.

  • Extension length

The number of digits that PBXware will match to local extensions.

If this field is set to ‘3’, all local extensions will have a range of 100-999.

If this field is set to ‘4’, all local extensions will have a range of 1000-9999...

  • Police / Fire / Ambulance

The phone number of the emergency services in the region where PBXware is located (e.g. Police: 17, Fire: 18, Ambulance: 15)

PBXware has an option to call these emergency services through certain trunks. If all channels are busy, an active call will be interrupted in order to dial these emergency numbers.

Music on hold

The system comes with a default "silence" sound file for music on hold. It can also be replaced with a royalty-free music file.
  • Royalty Free music on hold

This operation downloads royalty-free music that can be used as the default music on hold. It can be changed later.

Confirmation

Finally, the confirmation step allows you to recheck all the values and finish the wizard or start over from the beginning. If you click "Confirm and finalize“, the configuration wizard ends and the browser is redirected to the system's login screen.

If you click this button, all the details provided will be reset and you will return to the first step.

Click this button to confirm the data provided in the installation wizard and finalize the installation. All the details provided will be applied and the installation wizard will redirect you to the PBXware login screen.

System login

  • Login screen

In order to connect to the system, please point your browser to: http://IP_ADDRESS/ (For example: http://192.168.1.2/)

  • Email address

This is the administrator's email address that you set in the initial setup wizard.

  • Password

This is the administrator password that you set in the initial setup wizard

PBXware is now fully installed and ready to be put into production. 

Share

Physical installation

Or copy the link below

CONTENT