Alphalink
ADD A SIP TRUNK
To create a SIP trunk, please see Register a SIP trunk > Create a trunk
In order to register an Alphalink trunk on PBXware, several parameters must be configured.
Make sure that the PBXware public IP address is allowed in the SIP trunk whitelist.
Go to the section Home > Trunks located on the left side panel of PBXware (position yourself in the Master-Tenant in the case of a Multi-Tenant edition) and click the button Add a Trunk.
Choose Generic SIP as provider and click on Next step.
Fill in the following fields:
- Name or number: Enter a name for your trunk
- User type:peer
- Peer host: sip.openvno.net, sip2.openvno.net or sip3.openvno.net (depends on your trunk)
- Peer username: trunk username (0990000…)
- Peer secret: trunk password
Show the advanced options and configure the following options:
- Qualification (ms): 16000
- Pass-thru mode: Yes
- Sign up/Register: With username
- Inbound IP addresses :
95.140.14.192/27 217.15.80.160/28 217.15.80.248/29 217.15.88.160/28 217.15.95.0/25 130.93.0.0/25 95.140.14.224/27 217.15.88.192/28 217.15.88.248/29 185.120.179.160/27 130.93.0.224/27 217.15.80.163 217.15.95.97 217.15.95.98 Finally, fill in the following additional configuration so that the trunk can automatically re-register in case of an outage (expand the additional configuration field at the bottom of the page by clicking the button Advanced) :
[registration] expiration=120 auth_rejection_permanent=no max_retries=1000 retry_interval=60 fatal_retry_interval=60 forbidden_retry_interval=120 In order to check whether the SIP trunk is properly registered, go to Admin settings > Asterisk CLI, then type the following command:
pjsip show registrations 