Créer un trunk Afin d’enregistrer un trunk Alphalink sur PBXware, plusieurs paramètres sont à configurer.  Assurez vous que l’adresse IP publique du PBXware est autorisée dans la liste blanche du trunk SIP. Rendez-vous dans la section Accueil > Trunks […]">
FR EN

Bouygues

Estimated reading: 2 minutes

In order to register an Alphalink trunk on PBXware, several parameters must be configured. 

Make sure that the PBXware public IP address is allowed in the SIP trunk whitelist.

Go to the section Home > Trunks located on the left side panel of PBXware (position yourself in the Master-Tenant in the case of a Multi-Tenant edition) and click the button Add a Trunk.

Choose Generic SIP as provider and click on Next step.

Fill in the following fields:

  • Name or number: Enter a name for your trunk
  • User type:peer
  • Peer host: sbc01mlb.bsip.genbte.com
  • Peer username: trunk username (e.g. 300403)
  • Peer secret: trunk password

Show the advanced options and configure the following options:

  • Qualification (ms): 16000
  • Pass-thru mode: Yes
  • Sign up/Register: With username

Finally, fill in the following additional configuration so that the trunk can automatically re-register in case of an outage (expand the additional configuration field at the bottom of the page by clicking the button Advanced) :

[registration] expiration=120 auth_rejection_permanent=no max_retries=1000 retry_interval=60 fatal_retry_interval=60 forbidden_retry_interval=120

In order to check whether the SIP trunk is properly registered, go to Admin settings > Asterisk CLI, then type the following command:

pjsip show registrations 

Additional settings

By choosing the + prefix and the “Leading digits” option, PBXware will no longer replace the + with 00.

DID format

DID numbers added to a Bouygues trunk must be in E164 format (339...) on PBXware. For example:

– 33985001000
– 33480001000 

Share

Bouygues

Or copy the link below

CONTENT