FR | EN
Wiki Bicom Systems EnglishWiki Bicom Systems English
  • Home
  • Documentation
    • PBXware
      • Installation
      • Getting started
      • Editions
        • PBXware Multi-Tenant
        • PBXware Business
        • PBXware Contact Center
        • PBXware Service Provider
      • Advanced services
      • Supported phones
      • Autoprovisioning
    • Communicator
      • Communicator Desktop
      • Communicator GO
      • Communicator Web
    • SERVERware
      • Standalone
      • Mirror
      • Cluster
    • sipPROT
    • Tutorials
  • Videos
    • Communicator Desktop
  • Operators
  • Downloads
  • FAQ
Support
leafleaf
Most popular:
  • PBXware
  • Communicator
  • SIP
  1. Home
  2. SERVERware Standalone
  3. 12. Geo-redundancy
  4. Resource control
Updated on November 23, 2023
SERVERware Standalone
  • Folder icon closedFolder open icon1. Deployment guide
  • Folder icon closedFolder open icon2. Installation wizard
    • Add a backup host
  • Folder icon closedFolder open icon3. Configure the wizard steps
  • Folder icon closedFolder open icon4. Architecture
  • Folder icon closedFolder open icon5. Dashboard
  • Folder icon closedFolder open icon6. BSSUP
  • Folder icon closedFolder open icon7. Partitions
  • Folder icon closedFolder open icon8. Hosts
  • Folder icon closedFolder open icon9. Virtual private servers (VPS)
  • Folder icon closedFolder open icon10. Statistics
  • Folder icon closedFolder open icon11. Backup
  • Folder icon closedFolder open icon12. Geo-redundancy
    • Resource control
    • Configure geo-redundancy
    • Configure a replication cycle
    • Search and recovery
    • Site monitoring
  • Folder icon closedFolder open icon13. sipPROT
  • Folder icon closedFolder open icon14. Settings
  • Folder icon closedFolder open icon15. Archiving
  • Folder icon closedFolder open icon16. Network
  • Folder icon closedFolder open icon17. Reports
  • Folder icon closedFolder open icon18. System settings
  • Folder icon closedFolder open icon19. Administrators
  • Folder icon closedFolder open icon20. Partition users
  • Folder icon closedFolder open icon21. Access control
  • Folder icon closedFolder open icon22. Role and permissions
  • Folder icon closedFolder open icon23. Service pools
  • Folder icon closedFolder open icon24. Alarms
  • Folder icon closedFolder open icon25. Instance templates
  • Folder icon closedFolder open icon26. Templates
  • Folder icon closedFolder open icon27. Notifications
  • Folder icon closedFolder open icon28. Updates
  • Folder icon closedFolder open icon29. SSL
  • Folder icon closedFolder open icon30. License

Resource control

Estimated reading: 5 minutes

Resource control

The geo-redundancy server requires a separate installation and configuration for its services. Authentication and access authorization for this service are managed by API keys and access control lists (ACLs). There are two distinct use cases:

–  Simple data redundancy between sites

–  Hosting of data redundancy across sites

In the first case, the SERVERware will be in production on the primary site and the recovery site will be connected to the geo-redundancy server with a administrator API key. The administrator will have access to all the data on the Geo-Redundancy Server and will be able to perform recoveries from any site of any VPS replicated to the default or chosen partition.

For the second case, SERVERware on the main site will be connected to the geo-redundancy server with a user API key, and the recoveries will be handled by the host provider. The hosting provider will provide the credentials and the IP address for the GRS (Geo-Redundancy Server).

The replication service is managed via a command-line tool called swrepl-adm. 

Here is how to access it:

  1. Open an SSH client such as Putty
  2. In the field Hostname, enter the IP address of the host system (for example, 232.123.44.108).
  3. Set the port number to 2222 and click the button Open to initiate the connection.
  4. The default login credentials are root for the user and serverware for the password.

Once connected to your server, you can use the CLI commands to manage the geo-redundancy service.

If you deploy a mirror/cluster configuration of storage servers, use a floating IP so that the SSH client connects to any server in primary state. The replication storage must be located on the storage host in the NETSTOR pool. The Geo-Redundancy server storage should only be considered as a pool with SSD storage.

███████╗██╗ ██╗ ██╗ ██╗ ██╔════╝██║ ██║ ██║ ██║ ███████╗██║ █╗ ██║█████╗███████║ ╚════██║██║███╗██║╚════╝╚════██║ ███████║╚███╔███╔╝ ██║ ╚══════╝ ╚══╝╚══╝ ╚═╝ * SERVERware system IP Address/es: * 127.0.0.1/x 192.168.x.x/x 10.1.x.x/x 192.168.x.x/x * Login into the setup by visiting: * https://127.0.0.1:81/ * https://192.168.x.x:81/ * https://10.1.x.x:81/ * https://192.168.x.x:81/ ~ #
  • Begin by using the SWREPL application by running the following command:
swrepl-adm

swrepl-adm is the application that allows you to manage the replication service (create a site, manage resources, etc.)

The swrepl-adm console will open in the terminal and you can begin creating a site for replication.

Here is the list of commands supported by swrepl-adm:

"site" command
  • site add followed by the arguments below:
      • -storage [STOCKAGE] -quota [QUOTA] -throttle [BANDE PASSANTE] -admin [true/false] -allowedips [IP AUTORISEES] "description du site" [DESCRIPTION]

This command allows you to add a replication site with a description, an optional storage quota, a bytes-per-second limit, and the allowed IP addresses (by default, all).

-allowedips allows you to specify, in quotes, the list of IPs or subnets separated by commas in CIDR format, for example, "192.168.1.10, 10.1.0.0/16, 2001:db8:a0b:12f0::1/32".
the default value 0.0.0.0/0 in the list means that everything is allowed.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

site update followed by the arguments below:

      • -storage [STOCKAGE] -quota [QUOTA] -throttle [BANDE PASSANTE] -admin [true/false] -allowedips [IP AUTORISEES] "description du site" [DESCRIPTION]

Updates the replication site with a description, an optional storage quota, a bytes-per-second rate limit, and the allowed IP addresses (the default value allows all addresses).

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

site list [id] allows you to list the replication sites.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

site remove [-force] [id] allows you to delete a replication site.

"public_key" command
  • public_key- Displays its own rsa public key.
"replication" command
  • replication list [id]Displays the list of all replications defined for this daemon.
  • replication helpDisplays help.
"admin_key" command
  • admin_key - Displays or allows editing of the administrator's API key.
"task" command
  •  task list[-l, -t backup] [id] List tasks, showing *unique id* and other settings.
    -l - Limit list size (default is 10, 0 for unlimited)
    -t <type> - filter tasks of specific type backup,replication or srv_backup,srv_repl
    -r <replid> - filter task from specific replication
    -c <cycleid> - filter tasks of specific replication cycle
    id - id of task for detailed output
  • task cancel[id] Cancel task by its id
  • task count[-t replication] Count of tasks, with out arguments show global count of all tasks
    -t <type> - count tasks of specific type backup,replication or srv_backup,srv_repl
    -r <replid> - count task from specific replication
    -c <cycleid> - count tasks of specific replication cycle
Share

Resource control

Or copy the link below

Clipboard Icon
CONTENT
Leaf Illustration

© Bicom Systems France

Last updated: 4 July 2026 Legal noticePrivacyCookiesTerms © 2026 Bicom Systems